Manual smoke fan
Built in 90 Fan Exhaust System
- 35CVS small ventilation chimney (5 inch diameter)
- May be installed with angles of 6-90 degrees
- Option for a vertical chimney outlet (up to 2 meters from the combustion box top)
- Adapter for longer passages, up to 110 feet, according to the fireplace type.
- Combined fan exhaust system controller. The same device controls the combustion box and the fan exhaust system.
- The ventilator chamber must be installed at a minimum distance of 6.4 meters from the connection point, and up to 13.7 meters at the most.
- An access panel is required for the ventilated chamber.
- With horizontal and vertical termination.
- The power connects back to the fireplace, with 110 volts being required
Click here for a drawing of the 90 35CVS built in fan exhaust system.
Horizontal smoke fan with flat finish (end line)
- Small ventilation chimney, 35CVS (5 inch diameter)
- May be installed with angles of 6-90 degrees
- Another option is a vertical chimney outlet (up to 2 meters from the combustion box top)
- Suitable for longer passages, up to 65 feet, according to the fireplace model.
- Combined smoke fan control. The same device controls the combustion box and smoke fan
- The smoke fan chamber may also serve as a closing cover.
- The fan motor may be serviced from outside.
- A ventilation passage of at least 6.4 meters is required.
- For horizontal terminations only.
- The power connects back to the fireplace, 110 volts being necessary.
Click here for a drawing of a 35CVS flat horizontal smoke fan system.